Nitecore SC2 Smart Battery Charger (NZ-Stock)
- Up to 3A charging speed in a single slot
- 0.5A, 1A, 2A and 3A manually selectable charging current options
- Charging program optimized for IMR batteries
- Automatic detection of non-rechargeable Lithium batteries
- Automatic current selection based on battery capacity
- Capable of charging two batteries simultaneously
- Each battery slot controls and charges independently
- Automatically detects battery power status and displays charging progress
- Integrated USB port compatible with all USB devices
- Automatically stops charging upon charging completion
- Reverse polarity protection and short circuit prevention
- Li-ion battery restoration
- Overtime charging protection
- Features temperature monitoring to prevent overheating
- Made from fire retardant / flame resistant PC material
- Designed for optimal heat dissipation
- Certified by RoHS, CE, FCC and CEC
The SC2 is capable of activating depleted Li-ion batteries with protective circuit. After battery installation, SC2 will test and activate the battery before charging. When a battery is detected as damaged, all the LEDs over its slot will blink.
Li-ion Battery RecoveryUpon insertion of a 0V IMR battery, all eight LEDs on the SC2 will blink to indicate that it is not ready for charging. Press and hold the button over its slot until its power indicator blinks to enter the Recovery mode. Nitecore recommends abandoning this battery if it fails to be recovered after several attempts.
When attempting to activate an IMR battery, reverse polarity protection is temporarily disabled. Take special
care to ensure batteries are correctly inserted. Failing to do so may result in fire and explosion.
The SC2 will separately calculate the charging time of each battery. When the overall charging time exceeds ten hours, the SC2 will automatically stop charging and display a fully charged status. This is to prevent possible overheat or even explosion due to battery quality issues.
- Input Voltage
- AC 100-240V 50/60Hz 0.9A（MAX) 30W
- DC 12V 2.5A
- Output voltage:
- Battery: 4.35V±1% / 4.2V ±1% / 3.7V ±1% / 1.48V ±1%
- USB: 5V 2.1A
- Output current:
- 3A+2A MAX
- Compatible with:
- Li-ion/IMR/LiFePO4: Li-ion/IMR/LiFePO4:
- 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650
- Ni-MH(NiCd): AA,AAA,AAAA,C,D
- 9.28oz (263g) (without batteries and power cord)
- Nitecore Superb Charger SC2
- User manual
- NZ AC Mains cable
For more information, visit Nitecore's official page - http://charger.nitecore.com/product/sc2
The Smok X Cube Mini 75W TC Bluetooth 4.0 Mod (NZ-Stock)
The Smoktech X Cube Mini 75W TC Bluetooth 4.0 Mod is the compact version of the SMOKtech X Cube II, improving upon the predecessor's form factor while packing in up to 75W of output in single battery mode, improving temperature controlled output, along with making the RGB LED Firing Bar more comfortable and practical to use. The X Cube Mini maintains the foundation elements of the X Cube II while greatly reducing size. This in turns makes the RGB LED Firing Bar much easier to handle and use, increasing ergonomics and handling of the device. SMOKtech has now introduced three new features in Intelligent Coil Recognition, Adjustable Temperature Coefficient of Resistance and Adjustable Initial Resistance. Intelligent Coil Recognition can now recognize three distinct heating materials with Ni200 Nickel, Titanium, and Stainless Steel (Titanium and Stainless Steel is unlocked via mobile application). With Adjustable Temperature Coefficient of Resistance, each of the three aforementioned heating materials parameters can now be adjusted, bringing in a whole new dimension of control. Adjustable Initial Resistance, also known as Atomizer Lock, hard sets the resistance of your atomizer pertaining to TC mode, allowing for variances and contact issues to be neutralized to ensure a consistently accurate output. The X Cube Mini features up to 75W of output in traditional wattage mode, with an atomizer resistance range of 0.1 to 3.0 ohms. Integrating a trio of output improving features, a smaller form factor, and improvements in ergonomics and build quality, the SMOKtech X Cube Mini 75W TC is geared to be one of the most functionally impressive devices today.
Up to 75W of Power
- 1W to 75W
- 0.1 to 3.0 ohms
- Improved Temperature Control
- 200 to 600 Degrees Fahrenheit
- 0.06 to 3.0 ohms
- Three New Software Features
- Intelligent Coil Recognition
- Supports Ni200 Nickel
- Titanium and Stainless Steel Unlocked via Mobile App
- Adjustable Temperature Coefficient of Resistance
- Adjust Parameters of Each Heating Material
- Fine Tune and Customize Output
- Adjustable Initial Resistance
- Ensures Resistance on Load Remains the Same
- Adjustable through 0.05 ohms
- Intelligent Coil Recognition
- Compact and Form Factor Friendly
- Full Bar Firing with RGB LED
- 16 Million Colors
- OLED Screen
- Bluetooth 4.0 Technology
- Supports Android 4.3+ and iOS 7.0+
- Feature Rich Application
- Records Use Data and Tracks Useful Information
- Easily Change Settings
- New High Click Buttons
- Menu Navigation is Improved
- Magnetized Battery Door
- Utilizes One 18650 Battery (sold separately)
- Zinc Alloy and Stainless Steel Construction
- Brand: SMOK
- Accessories type: MOD
- Mod: Temperature Control Mod, VW Mod
- APV Mod Wattage: 75W
- Temperature Control Range: 200F - 600F
- 510 Connector Type: Spring Loaded
- Atmoizer Connector Diameter: 22mm
- Features: VW / TC
- Battery Form Factor: 18650
- Battery Quantity: One piece (not included in the package)
- Battery cover type: Magnetic
- Compatible with: 0.06 - 3.0ohm (temp mode) / 0.1 - 3.0ohm (watt mode) resistance
- 91mm by 50.6mm by 25.1mm
- Material: Stainless steel
- Available Color: Black, White, Silver
Eleaf iStick Pico Mod (NZ-Stock)
Eleaf iStick Pico Overview
PICO - Preferable, Innovative, Compact and Outstanding.
Tiny mod with a huge capability, 2017's best compact 75W Mod with an interchangeable18650 battery. Switch between various firing modes, there are 2 power adjustment buttons stealthily placed on the bottom of the unit while a bright OLED screen shows necessary vaping settings.
It usually comes with a Melo 3 Atomizer which is good but not great. We think the Uwell Crown would be a more suitable match or alternatively the Aspire Cleito.
Eleaf iStick Pico 75W Mod Features
- Dimensions: 45L x 70.5H x 23W mm
- Tread type: 510 thread
- Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
- Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3)
- Output wattage: 1 - 75W
- Resistance range: 0.05 - 1.5 ohms for VT mode
- Resistance range: 0.10 - 3.5 ohms for VW mode / Bypass mode
- Temperature range: 100 - 315C / 200 - 600F
- Battery: 1 x 18650 (Not Included)
- Firmware Upgradeable
- Colors: Full black, brushed silver, black bronze, white bronze, silver, grey.
Eleaf iStick Pico MOD Box Content
- 1 x iStick Pico Mod (Free battery included).
- 1 x Micro USB cable
- 1 x User manual
Thank you for shopping with us.
Charlie's Chalk Dust - Sweet Dream (NZ-Stock)
This e-liquid is an Olympic-level winner. Combine the power of vanilla cream, the courage of fudge, and the cunning of cinnamon and you get an indivisible trifecta of flavor.
Previously known as "Dream Creme"
Check out the reviews HERE.
60% VG / 40% PG